Newheek X-ray exposure hand switch is our company’s hot sale products. Our models are available in six models: L01, L02, L03, L04, L05 and L06.
The Newheek X-ray exposure hand switch
has so far been available in many countries around the world, including Europe, South America, North America and Asia. In addition to the majority of manufacturers producing X-ray machines for batching their X-ray machines, the Newheek X ray exposure hand switch
is also available in hospitals or clinics in various countries to repair and replace their damaged X-ray exposure hand switches
Newheek X-ray exposure hand switch
is our company’s hot sale products. Our models are available in six models: L01, L02, L03, L04, L05 and L06.
The failure phenomenon of the mechanical hand brake:
1: Contact oxidation occurs when the mechanical brake is used for a long time.
2: When the mechanical brake is pressed in the first gear or the second gear, there will be a phenomenon that a certain gear cannot be lifted.
3: The mechanical brake will have a broken lever.
4: The root of the mechanical hand brake will be pulled due to a long time, causing the root wire to be disconnected, resulting in the phenomenon that the second gear cannot be exposed.
5: Because all the wire of the manipulator gate is copper wire, the wire diameter is relatively thin and it is not easy to weld. Some customers report that the wire of the hand brake caused by the current is too large, and the current is blown.
If the X-Ray exposure hand switch on your X ray machine is broken, you can contact our customer service for more details on the Newheek X-ray exposure hand switch.