Newheek independently develops and produces X-ray exposure hand switch, which provides X-ray exposure hand switch to hospitals and manufacturers in many countries around the world, so the quality of Newheek X-ray exposure hand switch does not have to worry, X-ray exposure hand switch has CQC , RohsCE certificate
The hand brake switch is provided with two gear positions: one gear is turned on when the first gear is pressed, and one gear is kept on when the second gear is pressed, and the second gear is turned on. When released, the first and second gears are restored to the disconnected state.
Hand switch line: 3 cores and 4 cores 6 cores (6 cores are 3 switches)
Hand switch line length: 3 meters (extensible range 2.2 meters), 6 meters (5 meters stretchable range, three core wire and four core wire) 10 meter wire (with three cores) 15 meter wire (with four cores)
The company’s hand brake switch uses Omron micro switch for electrical life of 100,000 times.
Here are some of the advantages of the Newheek X-ray exposure hand switch:
1: The use of Omron micro-switches as component contacts does not occur at all.
2: Our company uses the wire core of the hand switch to be 0.2 square copper wire. If the current is large, it will not affect the gate. The outer skin of the hand brake line is made of PU material with corrosion resistance, good stretchability, no deformation due to long-term pulling, and not as ugly as the line is used for a long time.
3: The service life of the micro-motion hand brake is 5 times that of the mechanical hand brake, reaching 1 million times, even if the electrical life is 100,000 times.
If the X ray exposure hand switch on your C-arm, U-arm, G-arm or dental x ray machine etc. is broken, you can use Newheek’s X ray exposure hand switch repair replacement. For more information about the X-ray exposure hand switch, please consult our customer service.