Common fault in digital switches

Digital switches are used to control static images. In many cases, the X-ray machine suddenly fails to be exposed and the digital switches are turned off. Newheek summed up a lot about the reason for the digital switches.
Firstly, the phenomenon of contact oxidation and poor contact occurs when digital switches are used for a long time.When digital switches are in gear or in second gear, there is a phenomenon in which one of the gear switches doesn’t turn.
Secondly, the phenomenon of the shaft breaking at digital switches occurs. At the base of digital switches, a long pull at the base causes the wires at the base to break, causing the second gear to remain closed. Because all the wires at digital switches are thin copper wires with a thin wire diameter, the wires at digital switches will burn out when the current is too high.
In order to avoid wasting too much time, the timely treatment of patients is delayed. Some failures can be solved by ourselves as long as we carefully study and analyze the working principle of them. Contact us when you really can’t.
Newheek digital switches adopt mechanical press bar transmission, and the switch component adopts OMRON micro-switch, which has longer service life and higher sensitivity. You can provide quality testing services.
Newheek digital switches are wired and wireless digital switches, which can meet your different needs.