The use of X-ray machine exposure hand switch: mainly used for X-ray machines (such as portable, mobile, c-arm, filming machine, gastrointestinal machine, etc.).
The working principle of the X-ray machine exposure hand switch switch is to control the x-ray exposure. There are two switches. Press the 1st gear to prepare for exposure, and press the 2 gears at the same time to complete the exposure.
X-ray machine exposure hand switch configuration: 3-core 3 meters or 4-core 3 meters, 6m, 10m can be selected according to needs. (3 meters refers to the 30 cm spring wire made in a straight line of 3 meters).
How to use the X-ray machine exposure hand switch? The X-ray machine exposure hand switch is a hand-held switch with a two-stage grading switch, which is turned on when the button is pressed, and turned off when the button is released. Press the button to the first step to turn on gear I, and press all gears to turn on gear II. At this time, gear I remains in the on state, and the handbrake is equipped with a fixed bracket. The service life of the exposure hand brake is also very long, the electrical service life can reach 300,000 times, and the mechanical service life is 1,000,000 times, so the service life of the exposure hand brake is very long.
Our X-ray machine exposure hand switch is sold as a loose wire by default. Of course, if there is a demand, we will also connect the conventional plug for the customer, or we provide the plug connection method and the customer can install it by themselves.