Hand switch models

Hand switch is designed specifically for X-ray devices to control X-ray exposure.It can also be used to control the on-off of electrical signals, photographic equipment and medical diagnostic X-ray machine photographic exposure.In general, the general X-ray machine with two hand brake.X ray hand switch control flexible switch, convenient application.

The two-gear hand switch has two gears: first gear is switched on when the first gear is pressed, and then first gear is switched on when the second gear is pressed to keep the switch on, while the second gear is switched on.When released, both first and second gear return to the disconnected state.Hand brake wire has 3 cores, 4 cores and 6 cores (6 cores are usually 3-level switches).
The hand switch wire has a length of 3m (stretchable range 2.2m) and 6m (stretchable range 5m with three and four cores).Ten meters (with three cores) and fifteen meters (with four cores).
Newheek hand switch is divided into a variety of models and types, including wired and wireless hand switch.The wired hand switch is divided into six models: L01,L02,L03,L04,L05 and L06.
Newheek hand switch can meet your different procurement needs.