Hand controllers are used in X-ray machines

Hand controllers are the most important part of the X-ray machine, but in many cases, suddenly the X-ray machine won’t be exposed, and hand controllers won’t work. It affects the efficiency of the hospital or industry. So we’ve summarized some of the common failures of hand controllers, first of all hand controllers are going to be exposed to contact oxidation, poor contact over time. The second is that hand controllers will be stuck in first or second gear. Third, mechanical hand controllers will break.
Secondly, the root of hand controllers will open up the wires at the base due to prolonged pulling, causing the second level to be unexposed. And finally, because all of the mechanical hand controllers wires are copper thin wire with a smaller diameter, because the current is so high that it’s going to burn out. So for those failures, we developed a new type of hand controllers that significantly reduces the occurrence of hand controllers failures.
Newheek hand controllers are split into wired and wireless.The hand controllers component USES the “OMRON” micro switch for longer life and greater sensitivity. Our hand controllers are split into three files, each controlling a different X-ray machine. You can customize the length of hand controllers to meet your customer’s needs.