X-ray Hand Switch   | X-ray Foot Switch   Welcome to our company .We mainly manufacture X-ray hand switch and foot switch.
newheek hand switch
newheek x-ray hand switch

Analysis of the reasons why the exposure handbrake switch of high-power X-ray machine is set to 2 gears

Author:Hand Switch Manufacturer    Time:10月 12, 2022

Analysis of the reasons why the exposure hand switch of high-power X-ray machine is set to 2 gears:
First of all, let me explain to you the X-ray exposure handbrake. Two pairs of normally open switches with different stroke control circuits are installed in the double-speed X-ray exposure hand brake. The contacts of the normally open switches control the two circuits respectively. Turn on to make the X-ray machine in the pre-exposure state. This state can be canceled. Release the first button cap to cancel and start the cancellation process. No X-rays are generated. The contact of the normally open switch controlled by the second gear button position controls the high voltage generating circuit of the X-ray machine to close to generate X-rays. After releasing, all the above circuits are cut off and the machine returns to the unexposed state.
To put it simply, the reason why the high-power X-ray machine exposure handbrake switch is set to 2 gears: the first gear is preparation work, the doctor and the patient are ready to enter the state of preparation, and the second gear exposure is over.
If you are interested in exposure hand switch, you are welcome to contact us, phone (whatsapp): +8617616362243!

Replace philips handbrake

Service hotline: +86 536-8882360 / TEL: +86 18953613955 / Email: service@newheek.com

Copyright 2018-2023  Newheek x ray hand switch and foot switch supplier All Rights Reserved. sitemap

Mobile DR  UC-arm X-ray Machine  X-ray Collimator  X-ray Image Intensifier  X-ray Grid

X-ray High Voltage Cable  X-ray Bucky Stand  Radiography Table  X-ray Machines and Accessories  Flat Panel Detector

WeChat     WhatsApp      Twitter      LinkedIn      Facebook  

ADD-Factory: E Building of Future Star Scientific Innovation Industrial Zone of No.957 Wolong East Street,
Yulong Community, Xincheng Sub-District Office, Weifang Hi-tech Zone, Shandong Province, China