Maintenance of exposure hand switch.
Maintenance reasons for exposure hand switch: if a hospital calculates the use times of 50 people / day, the exposure hand switch will be used more than 30000 times a year, and the equipment will wear the internal parts of the exposure hand switch due to high frequency of use. Presumably, we have seen the situation that older equipment occasionally presses the hand switch but does not expose it. Then how to carry out simple maintenance for the hand switch with long service life What about it?
First, you need to take the exposure hand switch off
The maintenance of the hand switch is mainly to erase the dust on the copper spring piece inside. You can use a cotton swab or a little alcohol to wipe the surface of the copper spring piece until it is smooth.
The contact points should also be cleaned with cotton swabs to increase the sensitivity of the equipment.
After that, apply a little lubricating oil on the contact to extend the service life of the hand switch
Finally, install the handbrake, this time the hand switch maintenance is done.
In fact, this process is not complicated, the key is to persevere, regular maintenance.
Let’s hope we treat the exposure hand switch as patiently as our own devices, so as not to let it age
If you need, please contact us, oh, our exposure handbrake is a star product, with many categories. info@xrayswitch.com
Service hotline: +86 536-8882360 / TEL: +86 18953613955 / Email: service@newheek.com
Copyright 2018-2023 Newheek x ray hand switch and foot switch supplier All Rights Reserved. sitemap
Mobile DR UC-arm X-ray Machine X-ray Collimator X-ray Image Intensifier X-ray Grid
X-ray High Voltage Cable X-ray Bucky Stand Radiography Table X-ray Machines and Accessories Flat Panel Detector
ADD-Factory: E Building of Future Star Scientific Innovation Industrial Zone of No.957 Wolong East Street,
Yulong Community, Xincheng Sub-District Office, Weifang Hi-tech Zone, Shandong Province, China