Push button switch is an important part of X-ray machine.X-ray hand switch is used to control static imaging. In many cases, the X-ray machine cannot be exposed suddenly and the hand switch fails.
Newheek summed up many of the reasons for the handbrake failure.Firstly, due to the long-time use of push button switch, contact oxidation and poor contact will occur.Hand brake is in by first gear or 2 can appear the phenomenon that place of some gear is jumped not to rise.
Second hand brake will appear the phenomenon of gear lever fracture. In the root of push button switch, the wire at the root will be disconnected due to a long time of pulling, and the second gear will not be exposed. Because the wire of all hand brake is thin copper wire with thin diameter, the wire of push button switch will be burnt off due to excessive current.
In order to avoid wasting too much time, delay the timely treatment of patients.Some problems can be solved by ourselves as long as we carefully study and analyze their working principles.
Newheek push button switch can also provide you with quality detection services.Meet your different needs.
Service hotline: +86 536-8882360 / TEL: +86 18953613955 / Email: service@newheek.com
Copyright 2018-2023 Newheek x ray hand switch and foot switch supplier All Rights Reserved. sitemap
Mobile DR UC-arm X-ray Machine X-ray Collimator X-ray Image Intensifier X-ray Grid
X-ray High Voltage Cable X-ray Bucky Stand Radiography Table X-ray Machines and Accessories Flat Panel Detector
ADD-Factory: E Building of Future Star Scientific Innovation Industrial Zone of No.957 Wolong East Street,
Yulong Community, Xincheng Sub-District Office, Weifang Hi-tech Zone, Shandong Province, China