DR X-ray machine exposure hand switch maintenance

Recently, a customer called to ask about the maintenance of the DR X-ray machine exposure hand switch. Today, I will share with you the basic knowledge about the maintenance and maintenance of the exposure hand brake. The exposure hand switch is mainly used as the control component of the X-ray machine to control the exposure and preparation status of the equipment. It is directly related to the most important part of exposure, whether the tube and the various parts of the X-ray machine work normally. The exposure hand switch is divided into a mechanical part and an electrical part. Currently, mechanical parts can be maintained and maintained. For example, springs and mechanical contacts can be wiped and lubricated appropriately. To a large extent, it can reduce the wear of mechanical parts and increase the service life of the machine. At present, the DRX optical machine exposure hand switches produced by our company are all sealed, and no additional maintenance is required. The internal mechanical parts and contacts have been processed and are maintenance-free.
The mechanical life of the exposure hand switch produced by our Newheek can be as high as 20w, and the electrical life is very long. Assuming that each device receives 50 patients per day, it is 40w times at most. The exposure hand switch of each patient is exposed 2-4 times, and the average exposure hand switch is mechanically triggered 100-200 times per day, 200,000 times ÷ 200 times/day = The minimum mechanical life of each exposure hand switch switch of 1000 days can be used for about 3 years.
If you need maintenance and replacement services for the DR X-ray machine exposure hand switch, please contact us.