The X-ray machine uses a hand switch, which controls the exposure of various types of X-ray machines. But do you know what is going on when the hand switch fails?
The hand switch is used to control still images. In many cases, the X-ray machine suddenly fails to expose and the hand switch is turned off. Newheek summarized a lot of reasons for manual switching.
First, the long-term use of the hand switch will cause contact oxidation and poor contact. When the hand switch is in gear or second gear, there is a phenomenon that the gear switch does not turn.
Secondly, the hand switch is broken. On the base of the manual switch, pulling the base for a long time will cause the wire at the base to break, causing the second gear to remain closed. Since the wires at the hand switch are all thin copper wires with a small diameter, the wires at the hand switch will burn out when the current is too high.
The Newheek hand switch adopts mechanical pressure strip transmission, and the switching element adopts Omron micro switch, which has longer service life and higher sensitivity. You can provide quality testing services.
Newheek hand switch is divided into wired and wireless hand switch, which can meet your different needs.
Service hotline: +86 18953679166 / TEL: +86 18953679166 / Email: service@newheek.com info@xrayswitch.com
Copyright 2018-2023 Newheek x ray hand switch and foot switch supplier All Rights Reserved. sitemap
Mobile DR UC-arm X-ray Machine X-ray Collimator X-ray Image Intensifier X-ray Grid
X-ray High Voltage Cable X-ray Bucky Stand Radiography Table X-ray Machines and Accessories Flat Panel Detector
ADD-Factory: E Building of Future Star Scientific Innovation Industrial Zone of No.957 Wolong East Street,
Yulong Community, Xincheng Sub-District Office, Weifang Hi-tech Zone, Shandong Province, China