Home›Blog ›2-core 3-meter X-ray hand switch controls the oral panoramic X-ray machine
2-core 3-meter X-ray hand switch controls the oral panoramic X-ray machine
Author：Glinda Time：3月 12, 2019
2 core 3 meters x ray hand switch for one gear. In general, X-ray hand switch is used to control the exposure of dental X-ray machine.The operation of the oral panoramic X-ray machine is simple. You only need to turn on the power switch of the oral panoramic X-ray machine, select the exposure program, select the adult or child mode, check whether the CCD is in the correct position, and replace or remove the corresponding patient positioning part.
The corresponding exposure conditions (KV or mA values) are selected on the machine according to the patient’s body shape. Adjust the height of the oral panoramic X-ray machine, instruct the patient to take off the object to be taken off, tell the patient how to stand and what to pay attention to, and guide the patient into the machine.Press the exposure hand brake, start exposure, standby 8 seconds end 1-2 seconds after the release of exposure hand brake to end exposure, oral photography will be completed.
Finally, the patient is guided to leave the oral panoramic X-ray machine and then reset the machine.
The Newheek 2-core 3-meter X-ray hand switch can be customized with coil length, crystal head or air connector.
The oral panoramic X-ray machine is equipped with a 2-core and 3-meter X-ray hand switch, which can not only provide rapid and accurate exposure and complete photography, but also help doctors keep away from radiation.
Our 2-core 3-meter X-ray hand switch can meet your different needs.
ADD-Factory: E Building of Future Star Scientific Innovation Industrial Zone of No.957 Wolong East Street, Yulong Community, Xincheng Sub-District Office, Weifang Hi-tech Zone, Shandong Province, China